Date: 26/06/2017
Email: Keep my email address private
**Your comments must be approved before they appear on the site.
0 + 7 = ?: (Required)
Enter the correct answer to the math question.

You are posting a comment about...
ASK THE ENGINEER: We have a high temperature application....


We have a high temperature application.  We'd like to use ceramic components in our test chamber.  Can your ceramics withstand about 1200°C continuous in a gas fired furnace?    

Ceramic Specialist:

Yes our high purity ceramics can certainly withstand this temperature without a problem.  We would recommend ramping up relatively slowly to avoid thermal shock.  Thermal shock will occur when the ceramic components increase or reduce temperature too quickly and might cause cracking.  We suggest a ramp rate of approximately 100°C per hour.  In regards to cooling, when it's time to reduce the temperature it's also wise to bring the temperature down slowly.  We suggest reducing the temperature at a rate of 100°C per hour as well.  This will also prevent thermal shock.  

Now let's talk about the geometry of your part...Click Here to Contact a Ceramic Specialist

sun mon tue wed thu fri sat
     1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30  


Ask An Engineer


Start Your Order

OR CALL 800-779-3321